中国医疗器械杂志
   
  
   首页 |  期刊介绍 |  编 委 会 |  投稿指南 |  期刊订阅 |  留言板 |  联系我们 | 
中国医疗器械杂志 2019, Vol. 43 Issue (5) :369-371    DOI: 10.3969/j.issn.1671-7104.2019.05.016
监管与测试 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << Previous Articles | Next Articles >>
外科缝线标准中线径问题的研究
黄书泽
上海市医疗器械检测所,上海市,201318
Study on the Diameter of Surgical Suture in Standards
HUANG Shuze  
Shanghai Testing & Inspection Institute for Medical Devices, Shanghai, 201318

摘要
参考文献
相关文章
Download: PDF (0KB)   HTML 1KB   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 外科缝线是最常见的医疗器械耗材,广泛应用于手术时对人体组织缝合和结扎。在标准中线径规格标识关联了缝线粗细 和抗张强度的要求,三者是一一对应的,应当统一规范正确规格标识,以便临床方便和正确选用。在线径规格标识中, 采用线径的单根平均值相比多根平均值更科学合理。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
关键词线径   标准   规格   要求     
Abstract: Surgical suture is a common medical device made extensive use of hold body tissues together after an injury or surgery. Suture sizes are associated with the requirement of diameter and tensile strength in standard. They correspond with one by one. Suture sizes should be unified, standardized and correctly marked for correct and convenient selection in surgery. Using the average diameter of single suture is more scientific and reasonable than that of multiple sutures in marking.
Keywords:   
Received 2019-01-11;
About author: 黄书泽,E-mail: huangshuze415@sina.com
引用本文:   
黄书泽.外科缝线标准中线径问题的研究[J]  中国医疗器械杂志, 2019,V43(5): 369-371
HUANG Shuze.Study on the Diameter of Surgical Suture in Standards[J]  Chinese Journal of Medical Instrumentation, 2019,V43(5): 369-371
Copyright 2010 by 中国医疗器械杂志